●Professional Optical Design

Street light uses special optical system, with effective control of the visual optical distribution according to the road continuity, make sure good illumination and uniformity, reduce duplication of light,

We use the lamp lens with the light distribution curve of the bat wing, the lens are reasonably controlled the light distribution with good rectangular spot, and the light area efficiency is more than 87%, light transmittance greater than 92%, it could reduce light loss in maximum, make sure the light are fully using from light sources. In addition, the light area is very uniform, good light spot sharp by edges, no glare, and no light pollution.

Make professional design light distribution, lights average illumination on the main road is above 20Lux, uniform illumination is greater than 0.6, Meet the lighting standards of roads and motor vehicles.motor

●Efficiency Heat Dissipation

Embedded aluminum plate design, all LED lights are a long strip of aluminum plate embedded in the cooling tank shell, heat transfer surface is sufficiently to avoid the large aluminum plate area causes the surface air gas and the thermal resistance larger problem.

●Special Unique Thermal Conduction

Use special thermal film material between aluminum plate and shell heat the phase, at high temperatures, thermal film from the solid to liquid, it could be better to fill the slot in the heat shell, so that the side of aluminum plate and shell heat have full access to heat dissipation to be smaller air gap, high thermal conductivity.The maximum heat sink temperature ≤ 58 ℃ (Ta = 25 ℃) (GB was ≤ 65 ℃.)

●Special water-resistant and pressure ventilation design

Effective ventilation device, it can balance the light body pressure difference by temperature changing, and also avoid injury and waterproof effect of LED chip gold line.